Industrial Policy & Trade Monitor· 2666 actions· ✨ 90 recent

South Africa's International Trade Administration Commission (ITAC), acting on an application from Hall Longmore (the majority SACU producer of the product), issued a preliminary determination of dumping and recommended that SARS impose a provisional anti-dumping duty of 28.86% on large-diameter (external diameter >406.4mm) welded circular steel tubes and pipes of iron or steel (HS 7305.19, excluding longitudinally submerged arc-welded and longitudinally welded pipes) originating in or imported from Mozambique. SARS gave effect to the duty via Government Gazette 54854, Notice R.7606 (19 June 2026), amending Part 1 of Schedule No. 2 to the Customs and Excise Act, 1964, effective for six months up to and including 18 December 2026 while ITAC's investigation continues (ITAC Report No. 779).

Following a sunset-review application from Safripol, ITAC's Report No. 770 found that Chinese imports of polyethylene terephthalate (PET, tariff subheading 3907.6, item 207.01/3907.6/03.05) surged 186.08% between 2022 and 2023 despite the existing anti-dumping order, and that continued material injury to the SACU industry was likely if the duty lapsed. SARS gave effect to ITAC's recommendation via a Customs and Excise Act tariff amendment published in the Government Gazette, raising the anti-dumping duty on PET from China from 28.89% to 43.77%, effective 12 June 2026.

On June 2, 2026, USTR published final actionability findings in 60 parallel Section 301(b) investigations — the largest simultaneous Section 301 action in US history — determining that all 60 economies maintain unreasonable acts, policies, or practices by failing to impose or effectively enforce a prohibition on imports produced with forced labor. USTR proposed two additional duty rates: 10% on the 14 economies with partial forced-labor regimes (Canada, Ecuador, EU, Indonesia, Mexico, Pakistan, Argentina, Bangladesh, Cambodia, El Salvador, Guatemala, Malaysia, Taiwan, UK) and 12.5% on the remaining 46 economies. Tariff rates remain proposed pending a July 7, 2026 public hearing and subsequent finalization; the actionability determination is final.

The Customs Tariff Commission of the State Council announced on April 28, 2026 that China will extend zero-tariff treatment (preferential tariff rate of 0%) to all 53 African countries with which it maintains diplomatic relations, effective May 1, 2026 through April 30, 2028. The measure adds 20 African non-LDC nations to the existing zero-tariff scheme already covering 33 African LDCs since December 2024, making China the first major economy to grant full-coverage zero-tariff access to all African diplomatic partners. Coverage extends to all tariff lines except out-of-quota products (where only in-quota rates move to zero); eSwatini is excluded as it maintains diplomatic relations with Taiwan rather than the PRC.

Presidential decree signed by President Claudia Sheinbaum and published in the evening edition of the Diario Oficial de la Federación on 23 April 2026, in force 24 April 2026. The decree amends the Tariff of the Ley de los Impuestos Generales de Importación y de Exportación (LIGIE/TIGIE) and the Decreto que establece diversos Programas de Promoción Sectorial (PROSEC), imposing MFN import duties at 5%, 10%, 15%, 25%, 30% or 35% ad valorem on 185 tariff fractions covering chemical products, cosmetics, paper and cardboard, textiles, steel, graphic arts, aluminum manufactures, auto parts, electrical material, bicycles, musical instruments, furniture, wind turbines, and trailers. Goods originating in countries with which Mexico has a free-trade agreement remain eligible for preferential treatment, so practical incidence falls on China and other non-FTA suppliers (Korea, India, Vietnam, Thailand, Brazil, Indonesia, Taiwan, UAE, South Africa). Paired PROSEC modifications add tariff fractions to Article 5 sections I, II.b and XIX (electrical, electronic, automotive and auto-parts industries) at exempt (EX) rates.

ITAC's Amended Final Determination Report No. 772 found that fully automatic top-load washing machines (dry-linen capacity 10-17 kg, tariff subheading 8450.20.20) imported from China and Thailand were being dumped, causing material injury to the SACU industry on a complaint from Defy Appliances (Pty) Ltd. The Commission recommended, and SARS implemented via Government Notice 3907 of 2026, definitive anti-dumping duties ranging from 9.39% to 67.11% on the named origins, effective 23 April 2026, moving from a July 2025 provisional determination to a five-year definitive order.

South Africa's ITAC, acting on an application by ArcelorMittal South Africa and Columbus Stainless Steel, imposed definitive five-year anti-dumping duties on certain flat-rolled products of iron and steel (width ≥600 mm, HS 7208 and 7225 subheadings) from China (company-specific rates up to 47.92%), Japan (up to 57.23%) and Taiwan (24.20%), effective 19 March 2026 via SARS amendment to Schedule No. 2 of the Customs and Excise Act. The Commission found dumping from all three origins and material injury to the SACU regional industry (full findings in ITAC Report 767). Duties are layered on top of the existing 10% ordinary customs duty and 13% steel safeguard, substantially raising the landed cost of flat-rolled steel from Asia.

South Africa's International Trade Administration Commission (ITAC) recommended, and SARS implemented on 19 March 2026, definitive five-year anti-dumping duties on U, I and H sections of iron or non-alloy steel (structural steel, HS 7216.31, 7216.32, 7216.33 and 7216.40) imported from China (74.98%) and Thailand (20.32%). The investigation, initiated on an application by ArcelorMittal Rails and Structures (AMRAS), found dumped imports — totalling 28,800 tonnes in 2023/24, with China supplying ~65% — were causing material injury to the SACU domestic industry (full findings in ITAC Report 759). The definitive duties layer on top of an existing 10% ordinary customs duty and a 13% SACU-wide steel safeguard duty, bringing the effective total import burden on Chinese structural steel to approximately 98% above the base tariff.

President Trump signed a Presidential Proclamation on 20 February 2026 invoking Section 122 of the Trade Act of 1974 (19 U.S.C. § 2132) to impose a temporary 10% ad-valorem import surcharge on articles imported into the United States, effective 12:01 a.m. EST on 24 February 2026. The proclamation was issued within hours of the US Supreme Court's 20 February 2026 ruling in Learning Resources, Inc. v. Trump, which held that the International Emergency Economic Powers Act (IEEPA) does not authorize the president to set tariffs and vacated the IEEPA-based reciprocal-tariff regime previously in effect. The Section 122 surcharge is statutorily limited to 150 days (terminates 24 July 2026 absent Congressional extension) and the statute caps any such surcharge at 15% ad valorem. Goods qualifying as USMCA originating from Canada or Mexico are exempt; CAFTA-DR textile/apparel articles meeting specified rules of origin are exempt; and a substantial product-exception list excludes critical minerals, energy products, certain pharmaceuticals, electronics, vehicles, aerospace products, specified agricultural goods, and goods already subject to Section 232 duties (the Section 122 duty does not stack on Section 232).

Decree reforming various tariff fractions of the General Import and Export Duties Tariff (TIGIE), published in the Diario Oficial de la Federación on 29 December 2025 and in force 1 January 2026. The reform, approved by Congress as a statutory amendment to the LIGIE (Chamber of Deputies and Senate, Dec 2025) and signed by President Claudia Sheinbaum, raises MFN import duties to between 5% and 50% ad valorem on 1,463 tariff lines covering more than 20 chapters of the TIGIE, spanning automotive, auto parts, textiles, apparel, footwear, steel, aluminum, plastics, paper, leather, furniture, glass, toys, appliances and cosmetics. The increases apply only to goods originating in countries without a free trade agreement with Mexico — principally China, South Korea, India, Vietnam, Thailand, Brazil, Indonesia, Chinese Taipei, the UAE, and South Africa. The decree formalises at statutory level the September 2024 Sheinbaum executive order placing a 50% duty on finished passenger vehicles from non-FTA states and is framed by the Secretaría de Economía and SHCP as the operational tariff instrument of Plan México (2025-01-21).

South Africa's ITAC, acting on an application from STI Electrical (Pty) Ltd, recommended increasing the general customs duty on transformer cores with a power handling capacity not exceeding 50,000 KVA (tariff subheading 8504.90, split into new lines 8504.90.10 and 8504.90.90) from 5% to 15% ad valorem — the WTO bound rate. SARS gave effect to the change via a Schedule No. 1 tariff amendment effective 27 June 2025. As a SACU common external tariff, the increase applies across South Africa, Botswana, Eswatini, Lesotho and Namibia. ITAC found the domestic industry's production and sales volumes had declined over the investigation period and that it was price-uncompetitive against imports, and recommended a three-year review of industry performance post-implementation.

South Africa's International Trade Administration Commission (ITAC) made a preliminary finding that clear float glass imported from Tanzania was being dumped into the Southern African Customs Union (SACU) market, causing material injury and threat of further injury to the domestic glass industry. Following the investigation (initiated 6 June 2025 and detailed in ITAC Report 762), ITAC requested the South African Revenue Service (SARS) to impose provisional anti-dumping duties on imports classifiable under tariff subheadings 7005.29.17, 7005.29.23, 7005.29.25 and 7005.29.35. SARS implemented the provisional payments on 23 January 2026, running through 22 July 2026 pending a definitive determination; the specific duty rate was not disclosed in ITAC's public release. The measure applies across the entire SACU customs territory (South Africa, Botswana, Namibia, Eswatini, Lesotho).

At its 34th session in Harare on 5 June 2025, the SADC Committee of Ministers of Trade formally endorsed Angola's accession to the SADC Free Trade Area after Angola submitted its final tariff offer covering 90% of tariff lines — surpassing the SADC standard threshold of 85%. Angola becomes the 14th SADC member state to join the FTA, with implementation targeted for January 2026. The accession ends Angola's longstanding outlier status as the region's second-largest economy operating outside the bloc's duty-free zone, and opens tariff-free corridors between Angola and FTA members including South Africa, Zambia, DRC, Zimbabwe, and Mozambique.

President Trump signed Executive Order 14257 on 2 April 2025 declaring a national emergency over US trade deficits and imposing a baseline 10% ad-valorem tariff on imports from nearly all trading partners effective 5 April, with higher country-specific "reciprocal" rates effective 9 April. The rate schedule was constructed from a formula tied to bilateral goods-trade deficits and ranged from 10% (UK, Singapore, Brazil, Australia, others) through 20% (EU), 24% (Japan), 25% (Korea), 32% (Taiwan, Indonesia, Switzerland), 34% (China, later raised to 84% then 125% during the April escalation), 46% (Vietnam), 49% (Cambodia). Multiple subsequent EOs paused the country-specific rates for 90 days for non-China destinations on 9 April while keeping the 10% baseline, pending bilateral negotiations.

President Trump signed two Presidential Proclamations on 11 February 2025 reinstating a universal 25% ad-valorem tariff on all steel-mill products and raising the aluminum tariff from 10% to 25% on all imports into the United States, effective 12 March 2025. The proclamations revoked every bilateral exclusion and quota arrangement negotiated by the Biden administration with the EU, UK, Japan, Korea, Australia, and others under the 2021-2022 "alternative measures" frameworks, returning all trading partners to the baseline Section 232 rate without product-level or country-level carve-outs.