Industrial Policy & Trade Monitor· 2663 actions· ✨ 89 recent

President Trump signed an Executive Order on June 3, 2026 restructuring the entire US customs-entry compliance architecture for global importers. Key provisions impose heightened bonding minimums and domestic-asset requirements for foreign importers of record (IORs), require CAATSA-compliance and supply-chain-disclosure certifications, restrict foreign IORs to formal entry only (creating a de facto US-IOR monopoly on informal entry), establish a "good standing" requirement for IOR eligibility, and sharply curtail CBP's mitigation authority while setting enhanced penalty floors. DHS/CBP is directed to implement penalty-floor, export-documentation, and disposal provisions within 90 days (~September 2026) and the IOR structural reforms within 180 days (~November 2026). The EO is structurally distinct from tariff-rate instruments (Section 232 Proclamations 11021/11032), trade-remedy channels (USTR Section 301), statutory forced-labor enforcement (UFLPA), and targeted-sanctions channels (BIS/OFAC) — it reshapes the foundational compliance architecture through which all goods enter the US market.

The Office of the United States Trade Representative released the 2026 Special 301 Report on 30 April 2026, designating Vietnam as a Priority Foreign Country (PFC) — the most severe category under Section 182 of the Trade Act of 1974 (19 U.S.C. § 2242). This is the first PFC designation since Ukraine held the status from 2013 through 2015, a gap of approximately 11 years. The PFC designation triggers a statutory 30-day window (expiring ~30 May 2026) within which USTR must decide whether to initiate a Section 301 investigation under 19 U.S.C. § 2412(b)(2)(A), which could lead to tariffs, withdrawal of trade benefits, or other Section 301 enforcement remedies against Vietnam. Separately, the EU was added to the Watch List for the first time, citing AI training-data, geographical-indications, and customs-enforcement concerns.

Premier Li Qiang signed State Council Order No. 834 on 31 March 2026 promulgating the "Provisions on Industrial Chain and Supply Chain Security" (18 articles), adopted at the State Council executive meeting on 13 March 2026 and effective on the date of publication. The Provisions are the first dedicated PRC administrative regulation on industrial- and supply-chain security and consolidate authorities drawn from the National Security Law, Foreign Relations Law, Anti-Foreign Sanctions Law, and Foreign Trade Law into a horizontal defensive framework. They establish a cross-agency coordination mechanism spanning roughly 15 central departments (industrial, security, cyberspace, customs and financial regulators) plus provincial governments; create a security-investigation system; and vest broad countermeasure authority over both foreign states (Article 14 — import/export prohibitions and special levies) and foreign organisations and individuals (Article 15 — import/export bans, China-investment bars, transaction prohibitions, entry bars and revocation of work or residence permits, with extension to effectively-controlled subsidiaries). The Provisions also impose compliance, information-sharing, strategic-reserve and emergency-response obligations on PRC organisations and individuals, and authorise requisition, mandated production and directed transportation in the event of supply-chain disruption.

Sultan Haitham bin Tariq issued Royal Decree 27/2026 on 11 February 2026, published in Official Gazette 1635 on 15 February 2026, entering into force 30 days later on 17 March 2026. The decree enacts the GCC Common Industrial Regulatory Law as binding Omani national law, implementing the GCC-wide harmonised framework originally adopted at the Supreme Council level (RD 61/2008) with an expanded scope covering manufacturing, service, advanced technology, knowledge, and environmental industries. The law mandates prior industrial licensing for all new and materially modified industrial projects, sets unified approval, revocation, and compliance standards, and explicitly repeals prior conflicting national provisions — completing Oman's implementation of the common GCC industrial regulatory architecture alongside parallel implementations in UAE, KSA, Bahrain, Qatar, and Kuwait. This is one of three simultaneous Royal Decrees issued on 11 February 2026, alongside RD 28/2026 (GCC Unified Customs Law amendments) and RD 39/2026 (OPAZ Statute restatute), forming a coherent 2026 Omani industrial and economic-zone architecture restatement.

Pakistan's Directorate General of Customs Valuation (Karachi), acting under the Federal Board of Revenue, issued Valuation Ruling No. 2035/2026 on 16 January 2026 under Section 25A of the Customs Act, 1969, fixing revised minimum customs (C&F) values for 62 models of old and used branded mobile phones (Apple, Samsung, Google Pixel, OnePlus) imported in commercial quantity without original packaging or accessories, conditional on the device having been activated at least six months before export. The revision was a downward rationalization — press reporting cites benchmark values ranging from US$25 (iPhone SE, 1st/2nd generation) up to US$460 (iPhone 15 Pro Max) — bringing declared-value floors back in line with a documented decline in global secondary-market prices for older-generation devices. Global Trade Alert logs China as the principal origin affected.

Pakistan's Directorate General of Customs Valuation (DGCV), acting under the Federal Board of Revenue, issued Valuation Ruling No. 2036/2026 on 16 January 2026 under Section 25A of the Customs Act, 1969, fixing revised minimum customs (assessable) values for imported ammunition. The ruling supersedes the prior ammunition valuation ruling (No. 1995/2025, dated 28 March 2025) after the Directorate found that declared transaction values no longer reflected prevailing international market prices. Global Trade Alert logs China, Oman and Turkiye as the principal ammunition-exporting origins affected by the revised benchmark. No specific per-unit values or an aggregate trade value were disclosed in the sources reviewed, so this is filed as a qualitative severity rating pending disclosure of the underlying value schedule.

Malaysia's Minister of Finance gazetted P.U. (A) 25/2026, the Customs (Prohibition of Imports) (Amendment) (No. 2) Order 2026, on 14 January 2026, taking effect 15 January 2026. The order adds ammonium nitrate and potassium nitrate to the list of goods subject to import licensing under the Customs (Prohibition of Imports) Order, requiring importers to obtain an approved permit before bringing either chemical into Malaysia. Both compounds have legitimate fertilizer and industrial uses but are also recognised explosive precursors, and the measure is administered as a dual-use/security-sensitive chemical control rather than a straightforward agricultural-input tariff. Global Trade Alert lists Canada, China and Germany among the trade partners affected by the new licensing gate.

Malaysia's Ministry of Finance gazetted P.U. (A) 9/2026, the Customs (Prohibition of Imports) (Amendment) Order 2026, on 9 January 2026, taking effect 15 January 2026. The order adds 1-boc-4-piperidone and P-2-P methyl glycidic acid (BMK glycidic acid) — together with its methyl, ethyl, propyl, isopropyl, butyl, isobutyl, sec-butyl and tert-butyl esters — to the Second Schedule of the Customs (Prohibition of Imports) Order 2017, requiring an approved permit before import. Global Trade Alert lists China, Japan and South Korea among the trade partners affected by the new licensing gate.

Türkiye's Ministry of Trade published Tebliğ No. 2026/1 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4. Mükerrer), entering into force 30 January 2026. It imposes a reference-price-triggered import surveillance regime on photosensitive magnesium printing plates (GTİP 3701.30.00.00.21, USD 40/kg floor) and on kraft paper and kraft paperboard across several GTİP lines (4804.11.xx and 4804.21.xx, USD 0.7/kg and USD 1/kg floors respectively). Imports declared below these unit customs values require a surveillance certificate ("gözetim belgesi") from the Ministry's Import Directorate General before customs clearance, valid six months.

Türkiye's Ministry of Trade published Tebliğ No. 2026/10 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 days later on 30 January 2026. It imposes a forward-looking import surveillance regime on filtering and purifying machinery and filters for liquids and gases: water filtration/purification machinery (GTİP 8421.21.00.00.00), oil and fuel filters for internal combustion engines (8421.23.00.00.00), and air-intake and other filtration equipment (8421.31.00.90.00, 8421.39.25.90.00). All four lines require a surveillance certificate ("gözetim belgesi") when the unit customs (CIF) value is below USD 10/kg, issued electronically by the Ministry's Import Directorate General before customs clearance. Global Trade Alert lists Austria, Belgium, and Bosnia & Herzegovina among the principally affected exporting countries.

Türkiye's Ministry of Trade published Tebliğ No. 2026/11 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 days later on 30 January 2026. It imposes a forward-looking import surveillance regime on fire extinguishers: imports priced at or below a reference unit customs value require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General before customs clearance. Global Trade Alert logs the measure as a discrete "certainly harmful" import-licensing intervention (MAST Chapter E: non-automatic licensing) covering inward flows from all origins, with China, France and Germany named among the affected exporting countries; the exact GTİP line and USD/unit threshold are not publicly disclosed.

Türkiye's Ministry of Trade published Tebliğ No. 2026/12 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 days later on 30 January 2026. It imposes a forward-looking import surveillance regime on escalators and moving walkways: imports priced at or above a Ministry-set reference unit customs value require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General before customs clearance — the inverse-direction (price-ceiling) variant of the reference-price template used elsewhere in the same package. Global Trade Alert logs the measure as a discrete "certainly harmful" import-licensing intervention (MAST Chapter E: non-automatic licensing) covering inward flows from all origins, naming China among the affected exporting countries alongside Australia and Austria; the exact GTİP line and USD/unit threshold are not publicly disclosed.

Türkiye's Ministry of Trade published Tebliğ No. 2026/13 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 days later on 30 January 2026. It imposes a forward-looking import surveillance regime on television dish (satellite) antennas: imports priced at or below a Ministry-set reference unit customs value require a surveillance certificate ("gözetim belgesi") issued electronically before customs clearance. Global Trade Alert logs the measure as a discrete "certainly harmful" import-licensing intervention (MAST Chapter E: non-automatic licensing), naming China, Czechia and France among the affected exporting countries; the exact GTİP line and USD/unit threshold are not publicly disclosed.

Türkiye's Ministry of Trade published Tebliğ No. 2026/14 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on motor vehicle safety seat belts under GTİP 8708.21.90.00.00. Whenever the declared unit customs value falls below the Ministry-set reference floor of USD 12/kg (gross weight), import is only permitted with a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General, which customs requires at declaration registration. Global Trade Alert lists China, Czechia and Estonia as the principally affected exporting countries.

Türkiye's Ministry of Trade published Tebliğ No. 2026/15 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on motor vehicle safety glass — windscreens, rear windows and other automotive safety glazing under GTİP 8708.22. Whenever the declared unit customs value falls below the Ministry-set reference floor of USD 6.5/kg (gross weight), import is only permitted with a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General, which customs requires at declaration registration. Global Trade Alert lists Belgium, China and Czechia as the principally affected exporting countries.

Türkiye's Ministry of Trade published Tebliğ No. 2026/16 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on table tennis tables (GTİP 9506.40): imports declared below a Ministry-set reference unit value require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General via the Gümrükler Tek Pencere Sistemi before customs will register the declaration. Global Trade Alert lists China as the principally affected exporting country and rates the intervention "certainly harmful."

Türkiye's Ministry of Trade published Tebliğ No. 2026/17 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 days later on 30 January 2026. It imposed a forward-looking import surveillance regime on wheeled agricultural tractors and wheeled forestry tractors (GTİP 8703.21.10.90.19), with five power-based classifications each carrying its own unit customs-value reference price ranging from USD 5,078 to USD 44,890 per unit; imports declared below the applicable threshold require a gözetim belgesi (surveillance certificate) issued electronically by the Ministry's Import Directorate General before customs clearance. Global Trade Alert logs China, Czechia and Germany as principally affected. A subsequent amendment (Tebliğ, Official Gazette 17 April 2026, Sayı 33219) removed wheeled agricultural/forestry tractors from the surveillance table entirely and replaced them with ATVs, effective 17 May 2026 — ending the tractor measure after roughly 3.5 months in force.

Türkiye's Ministry of Trade published Tebliğ No. 2026/18 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 days later on 30 January 2026. It imposes a forward-looking import surveillance regime on air conditioning machines and split-system units: other air-conditioning units (GTİP 8415.10.90.00.19) below a unit customs value of USD 250/unit, other parts (GTİP 8415.90.00.90.09) below USD 150/unit, and split-system indoor units (GTİP 8415.90.00.90.12) below USD 100/unit require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General before customs clearance. Global Trade Alert lists China as the principally affected exporting country.

Türkiye's Ministry of Trade published Tebliğ No. 2026/19 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on lithium iron phosphate (LFP) prismatic accumulators under GTİP 8507.60.00.00.22 (4.9V–400V) and 8507.60.00.00.23 (>400V) whenever the declared unit customs value falls below a reference floor of USD 12/kg and USD 15/kg (gross weight) respectively. Below those thresholds, import is only permitted with a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General (İthalat Genel Müdürlüğü), which the customs authority requires at declaration registration. Certificates are valid six months.

Türkiye's Ministry of Trade published Tebliğ No. 2026/2 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on chlorinated paraffins (GTİP 3824.99.92.00.34). Imports declared at or below a unit customs value of USD 2.5/kg gross weight require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General before customs clearance. The measure is de jure origin-neutral; Global Trade Alert's trading-partner data for this intervention was not accessible without a paid account, so no specific target countries are asserted here.

Türkiye's Ministry of Trade published Tebliğ No. 2026/20 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on load cells (GTİP 9031.80.80.90.11, reference price USD 20,000/tonne) and other measuring/checking instruments (GTİP 9031.80.80.90.19, reference price USD 7,000/tonne) whenever the declared customs value falls below those thresholds. Below the floor, import is only permitted with a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General, required by customs at declaration registration and valid for six months.

Türkiye's Ministry of Trade published Tebliğ No. 2026/3 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 days later on 30 January 2026. It imposes a forward-looking import surveillance regime on vacuum storage bags: imports priced below a reference unit customs value require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General before customs clearance. Global Trade Alert logs the measure as a "certainly harmful" intervention but does not publicly disclose the exact GTİP line or USD/unit threshold; no single exporting country is named in the primary text.

Türkiye's Ministry of Trade published Tebliğ No. 2026/4 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on marble, travertine, alabaster and other worked building/monumental stone (GTİP 6802.21 and 6802.91.00.00.19). Imports declared at or below a unit customs value of USD 700/tonne require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General before customs clearance. Global Trade Alert lists China, Greece and Iran as the principally affected exporting countries.

Türkiye's Ministry of Trade published Tebliğ No. 2026/5 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on woven wire cloth and netting of iron or steel welded at the intersections (GTİP 7314.31.00.00.00 and 7314.39.00.00.00). Imports declared at or below a unit customs value of USD 3.5/kg require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General before customs clearance. Global Trade Alert lists China as the affected jurisdiction.

Türkiye's Ministry of Trade published Tebliğ No. 2026/6 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on vehicle suspension leaf springs (HS 7320 — springs and leaves for springs, of iron or steel; specifically heading 7320.10). Whenever the declared unit customs value falls below a Ministry-set reference price floor, import is only permitted with a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General, referenced at customs declaration. Global Trade Alert lists Belgium, China and Germany as the principally affected exporting countries.

Türkiye's Ministry of Trade published Tebliğ No. 2026/7 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on razors with non-replaceable blades (GTİP 8212.10.10.00.00), razor blades (8212.20.00.10.00) and razor blade blanks (8212.20.00.20.00). Imports declared at or below a unit customs value of USD 20/kg gross weight require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General before customs clearance. Global Trade Alert lists Belgium, China and Czechia as affected jurisdictions, in alphabetical rather than ranked order.

Türkiye's Ministry of Trade published Tebliğ No. 2026/8 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on staples of iron or steel (GTİP 8305.20.00.21.00 — strip staples of the type used in office, upholstery and packaging staplers). Imports declared at or below a unit customs value of USD 1.70/kg gross weight require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General before customs clearance. Global Trade Alert lists China as the principally affected exporting country.

Türkiye's Ministry of Trade published Tebliğ No. 2026/9 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 31 December 2025 (Sayı 33124, 4th mükerrer), entering into force 30 January 2026 (30 days after publication). It imposes a forward-looking import surveillance regime on piston-type air compressors incorporating an air tank (GTİP 8414.80.22.90.11). Imports declared at or below a unit customs value of USD 90/unit require a surveillance certificate ("gözetim belgesi") issued electronically by the Ministry's Import Directorate General before customs clearance. Global Trade Alert logs the measure as a discrete "certainly harmful" import-licensing intervention; its public affected-country list (Austria, Belgium, Brazil, …) is alphabetical rather than an exporter ranking, and the underlying Tebliğ is origin-neutral on its face.

Morocco's Loi de Finances n° 50-25 for fiscal year 2026, promulgated by Dahir n° 1-25-67 of 10 December 2025 and published in Bulletin Officiel n° 7465 bis of 16 December 2025, sets the FY2026 customs-tariff schedule (continuing the EU Common External Tariff alignment process at 2.5%/17.5%/40% tiers with sector-specific input reductions), amends the fiscal regimes for Zones d'Accélération Industrielle and Casablanca Finance City, and delivers the 2026 tranche of the multi-year IS (corporate-tax) rate-convergence schedule under Framework Law n° 69-19. The law also extends green-investment fiscal accelerators aligned with the EU's Carbon Border Adjustment Mechanism and the EU-Morocco Strategic Partnership on Sustainable Raw Materials Value Chains, and contains phosphate-sector fiscal provisions affecting OCP Group's DAP/MAP/TSP export treatment. Entry into force: 1 January 2026.

Pakistan's Directorate General of Customs Valuation (Karachi), acting under the Federal Board of Revenue, issued Valuation Ruling No. 2029/2025 on 3 December 2025, fixing new minimum customs values for imports of eleven aroma and aromatic chemicals used in perfumes and cosmetics — Citronellol, Coumarin, Dihydro Myrcenol, Eugenol, Geraniol, Linalool, Musk Ambrette, Sandela, Eucalyptus Oil, Peppermint Oil, and Vanillin — sourced primarily from China. The ruling was triggered by representations from domestic importer M/s Franscent (Pvt.) Ltd., which alleged systematic under-invoicing of these products, and was determined under Section 25(9) read with Sections 25(5) and 25(6) of the Customs Act, 1969, after the Directorate found transaction-value and comparable-goods valuation methods unworkable due to sparse and inconsistent import data. Clearance Collectorates were instructed to enforce accurate CAS-number and chemical-identity declarations to prevent misclassification against the new benchmark values.

Pakistan's Directorate General of Customs Valuation (Karachi), acting under the Federal Board of Revenue, issued Valuation Ruling No. 2024/2025 on 24 November 2025 (C.No. Misc/54/2021-III/1115), superseding Valuation Ruling No. 1822/2023 and setting fresh minimum customs values (C&F, US$/kg) for latex rubber threads across four count-range bands, differentiated by origin: China at US$2.69-3.53/kg and Malaysia/Thailand at US$2.85-3.66/kg, rising with thread count (30-44, 45-55, 56-63, 64-90 counts). The Directorate rationalized the values downward at stakeholders' request, citing a documented downward trend in prevailing international prices; the ruling functions as an enforceable minimum-value floor under Section 25A of the Customs Act, 1969, applied when declared invoice values fall below the benchmark.

President Claudia Sheinbaum signed a comprehensive reform to Mexico's Customs Law (Ley Aduanera) published in the Diario Oficial de la Federación on 19 November 2025, entering into force 1 January 2026. The decree formally recognises the Agencia Nacional de Aduanas de México (ANAM) as the autonomous customs authority with expanded inspection and fiscalisation powers, creates a new inter-secretarial Consejo Aduanero with binding decisional authority over customs-agent licensing, and mandates real-time electronic traceability and video-surveillance at all recintos fiscales. The reform is Mexico's most comprehensive statutory overhaul of its customs-administration architecture in over a decade, directly conditioning USMCA-origin compliance infrastructure for approximately US$800 billion in annual MX-US trade and over 3,200 IMMEX-registered nearshoring operators.

Pakistan's Directorate General of Customs Valuation (Karachi), acting under the Federal Board of Revenue, issued Valuation Ruling No. 2023/2025 on 5 November 2025 (C.No. Misc/12/2025-I/1073), fixing new minimum customs values under Section 25A of the Customs Act, 1969 for imported Zirconium Silicate (PCT 2530.9020): US$2.084/kg (C&F) for China, Thailand, Indonesia, Malaysia and Vietnam-origin shipments, and US$2.200/kg for Europe/USA-origin shipments. The ruling followed a finding that declared import values — as low as US$0.35/kg from China against a China/Europe international benchmark of US$1.70-1.82/kg for the constituent raw material (Zircon Sand) — were substantially below prevailing international market prices, and names China as the "global benchmark" origin used to set the floor.

Türkiye's Ministry of Trade published Tebliğ No. 2025/9 ("İthalatta Gözetim Uygulanmasına İlişkin Tebliğ") in the Official Gazette on 19 September 2025, entering into force 19 October 2025 (30 days after publication). It imposes a forward-looking import surveillance regime on new pneumatic rubber tyres and inner tubes across 15 GTİP lines under headings 4011 (passenger, truck/bus, motorcycle, bicycle and agricultural/forestry tyres) and 4013 (inner tubes), with per-line CIF unit-value reference floors ranging from USD 3/kg (bicycle tyres) to USD 6/kg (steel-braced radial and motorcycle-tube lines). Imports declared below the applicable threshold may only clear customs with a surveillance certificate ("gözetim belgesi") issued by the Ministry's Import Directorate General.

Türkiye's Ministry of Trade published İthalatta Gözetim Uygulanmasına İlişkin Tebliğ (No: 2025/4) in Resmî Gazete on 31 July 2025, adding ice-making machines (GTİP 8418.69.00.99.12) to the country's import surveillance mechanism. Imports whose unit customs (CIF) value is below USD 16 per kilogram gross weight require a six-month "gözetim belgesi" (supervision certificate) from the Imports General Directorate before customs clearance; the measure entered into force on 30 August 2025, thirty days after publication. Global Trade Alert logs the intervention as "certainly harmful" and names Belgium, Canada and China among the principal exporters affected. The mechanism does not block imports outright but adds a licensing/documentation step that functions as a de facto minimum-price floor on cheap ice-maker imports, protecting domestic appliance assemblers from underpriced units clearing customs undetected.

Türkiye's Ministry of Trade published İthalatta Gözetim Uygulanmasına İlişkin Tebliğ (No: 2025/3) in Resmî Gazete (Issue 32972) on 31 July 2025, adding sodium gluconate (GTİP 2918.16.00.00.13) to the country's import surveillance mechanism. Imports whose unit customs (CIF) value is at or below USD 1.5 per kilogram gross weight require a six-month "gözetim belgesi" (supervision certificate) from the Imports General Directorate before customs clearance; the measure entered into force on 30 August 2025, thirty days after publication. Global Trade Alert logs the intervention as "certainly harmful" and names China as the principal exporter affected. The mechanism does not block imports outright but adds a licensing/documentation step that functions as a de facto minimum-price floor on cheap sodium gluconate imports. It runs in parallel with a separate Turkish anti-dumping investigation into sodium gluconate from China opened under the Prevention of Unfair Competition in Imports framework (Tebliğ No: 2025/9) around the same period, protecting the domestic producer (Sunar Mısır Entegre Tesisleri) that petitioned for both measures.

Türkiye's Ministry of Trade published İthalatta Gözetim Uygulanmasına İlişkin Tebliğ (No: 2023/2)'de Değişiklik Yapılmasına Dair Tebliğ in Resmî Gazete on 17 July 2025, doubling the unit customs (CIF) reference value that triggers the country's import-surveillance mechanism for photovoltaic cells not assembled into modules or panels (GTİP 8541.42.00.00.00), from USD 85/kg to USD 170/kg. Imports declared at or below the new threshold require a "gözetim belgesi" (supervision certificate) from the Imports General Directorate before customs clearance. The amendment entered into force sixty days after publication, on 15 September 2025. Global Trade Alert logs the intervention as "certainly harmful" and names China and Cambodia as the principal exporters affected. The measure does not block imports outright but raises the price floor below which a licensing/documentation step is triggered, functioning as a de facto minimum-price barrier against underpriced photovoltaic-cell imports — part of a broader push to protect Türkiye's domestic solar-manufacturing base as it scales toward the National Energy Plan's 52.9 GW installed-solar target.

Malaysia's Ministry of Finance gazetted the Customs (Prohibition of Imports) (Amendment) (No. 2) Order 2025, amending the Customs (Prohibition of Imports) Order 2023 (P.U. (A) 117/2023) issued under subsection 31(1) of the Customs Act 1967. The order imposes an absolute prohibition, effective 31 December 2025, on importing dummy buckles, seat-belt alarm stoppers, seat-belt clip extenders, or any other accessory or device designed to be inserted into a seat-belt buckle to disable or bypass the seat-belt safety reminder and render the mechanism inoperative. The ban applies to all countries of origin without exception; Global Trade Alert lists Belgium, China and Czechia as principally affected exporters of the trade-catalogue category covering these parts.

DGFT Notification No. 19/2025-26, issued 17 June 2025 under sections 3 and 5 of the Foreign Trade (Development and Regulation) Act 1992 and the Foreign Trade Policy 2023, reclassifies all of Customs Tariff Heading (CTH) 2843 — colloidal precious metals, inorganic or organic compounds of precious metals, and amalgams of precious metals, covering gold, silver, platinum, rhodium and palladium forms (ITC-HS codes including 28431010 colloidal gold, 28431020 colloidal silver, 28432100 silver nitrate, 28433000 gold compounds, 28439011 sodium aurous thiosulphate, 28439012 noble-metal solutions, and 28439020 amalgams) — from "Free" to "Restricted" import status. Importers now require DGFT prior authorisation per consignment; the stated purpose is to close a route for importing gold disguised as chemical compounds. Genuine industrial and manufacturing users (electronics, electrical, and specialised chemical industries) remain able to import against an authorisation, so the measure targets bullion arbitrage rather than input-supply continuity. It was issued the same day as, and as a companion measure to, DGFT Notification No. 18/2025-26 (gold-bearing PGM alloys, CTH 7110), filed separately as 2025-06-17-india-dgft-pgm-alloys-import-licensing.

DGFT Notification No. 18/2025-26, issued 17 June 2025 under the Foreign Trade (Development and Regulation) Act 1992, reclassifies alloys of palladium, rhodium, and iridium containing more than 1% gold by weight (ITC-HS codes 71102100, 71102900, 71103100, 71103900, 71104100, 71104900) from "Free" to "Restricted" import status, requiring DGFT prior authorisation per consignment. Unwrought or powder-form palladium, rhodium, and iridium below the 1% gold threshold remain freely importable. The measure extends an earlier platinum-alloy restriction (Notification No. 60/2024-25, 5 March 2025) to the full Customs Tariff Heading 7110 at the 4-digit level, closing a route for importing gold in disguised alloy form.

On 4 June 2025 the Verkhovna Rada adopted Law No. 4473-IX, amending the Customs Code of Ukraine to exempt from import (customs) duty goods brought into Ukraine's customs territory for security and defence needs. The law entered into force on 15 June 2025. Coverage includes optical fibre and fibre-optic cable imported by enterprises for the manufacture or repair of unmanned aerial systems (drones) and other defence equipment, as well as materials supplied to the Armed Forces of Ukraine and other authorised defence entities, removing a cost input for Ukraine's wartime domestic drone-manufacturing base. A companion law, No. 4474-IX, grants a parallel VAT exemption for the same import category.

On 4 June 2025 the Verkhovna Rada adopted Law No. 4474-IX, amending subsection 2 of section XX ("Transitional Provisions") of the Tax Code of Ukraine to exempt from value-added tax the import into Ukraine's customs territory of goods for security and defence needs, including optical fibre and fibre-optic cable used in the manufacture and repair of unmanned aerial systems (drones). The law entered into force on 15 June 2025. It is the VAT-side companion to Law No. 4473-IX (filed separately), which grants the equivalent customs-duty exemption for the same import category — the Rada split duty relief and VAT relief into two parallel statutory amendments passed the same day.

Bangladesh's National Board of Revenue gazetted SRO 225-Ain/2025/48/Customs and SRO 226-Ain/2025/48/Customs on 29 May 2025, revising the minimum customs valuation (tariff-value) floors used to assess duty on a range of imported consumer and industrial goods, effective 2 June 2025. The amendment raised minimum import values for chocolate and cocoa-containing food preparations, removed the minimum-value floor for base oil used by petroleum processing/blending industries, and adjusted floors — mostly downward — for soap and other cleaning preparations and a handful of additional product lines. Minimum-value schemes set a customs-assessable price floor per unit regardless of the invoiced transaction value, so a higher floor functions as a de facto increase in the duty base (and hence landed cost) for under-invoicing-prone product categories, while a removed or lowered floor eases the duty base for the affected goods.

Loi n° 2023-007 portant refonte du Code Minier replaces the 2005-021 framework as the comprehensive legal foundation for Madagascar's mining sector. The headline fiscal change raises the ad-valorem mining royalty from 2% to 5%, decomposed as a 2% mining rebate (ristourne minière) earmarked for local communities and a 3% mining royalty (redevance minière) accruing to the State; a 30% reduction applies where extracted products are processed domestically, embedding a value-add incentive into the royalty schedule. The law also introduces a dedicated environmental, health and safety chapter, modernises customs/fiscal/foreign- exchange provisions, tightens permit-issuance procedures and strengthens oversight of small-scale mining. It is the first IPTM entry for Madagascar — a Tier-2 critical-minerals jurisdiction with material cobalt (Ambatovy), graphite (Molo / Green Giant), ilmenite/zircon (QMM Fort-Dauphin) and emerging REE / vanadium / nickel pipelines.

Canada's Fighting Against Forced Labour and Child Labour in Supply Chains Act (S.C. 2023, c. 9; "Bill S-211") received Royal Assent on 11 May 2023 and entered into force on 1 January 2024. It imposes a binding annual supply-chain disclosure obligation on government institutions and in-scope private-sector entities (any two of: ≥CAD 20m assets, ≥CAD 40m revenue, ≥250 employees) requiring a public report by 31 May each year detailing steps taken to prevent and reduce the risk of forced or child labour in their supply chains. The Act also amends the Canadian Customs Tariff (Schedule 9898.00.00) to extend the existing import prohibition on goods produced with forced labour to also cover goods produced with child labour, enforced at the border by the Canada Border Services Agency (CBSA). Criminal penalties of up to CAD 250,000 apply for non-compliance, false reporting, or obstruction.

The U.S. Department of Commerce published a final rule establishing the Aluminum Import Monitoring and Analysis (AIM) system (19 CFR part 361), modelled on the pre-existing steel monitoring system. Importers, customs brokers, or their agents must obtain an online AIM import license for every entry of covered aluminum products, disclosing the countries where the primary aluminum used was smelted and where the product was most recently cast. The rule was announced 23 December 2020; after a stay and delay of the compliance date, it took full effect 28 June 2021, from which point a license became mandatory for all covered aluminum imports.