Industrial Policy & Trade Monitor· 2665 actions· ✨ 90 recent

Türkiye's Ministry of Trade published Communiqué No. 2026/17 in Resmî Gazete No. 33282 on 16 June 2026, imposing definitive anti-dumping duties on imports of cold-rolled flat steel (excluding non-annealed), galvanized flat steel, and pre-painted flat steel originating in the People's Republic of China and South Korea, covering products under GTIP codes 7209, 7210, 7211, 7212, 7225, and 7226. The investigation — initiated under Communiqué No. 2024/41 of 25 December 2024 — found that dumped imports from both countries were causing material injury to domestic producers. Duty rates for Chinese exporters range from 22.37% (Angang Steel) to 32.40% (all-others CIF); South Korean rates range from 10.48% (POSCO) to 27.00% (all-others). The measure runs for five years from the date of publication, under Law No. 3577 on Prevention of Unfair Competition in Imports.

President Trump signed Proclamation 11032 on June 1, 2026 (effective June 8, 2026), making further adjustments to Section 232 tariff regimes for aluminum, steel, and copper. The proclamation expands temporary 15% reduced ad valorem rates to cover agricultural equipment and certain residential HVAC systems previously subject to the 25% derivative tariff, and creates a new Annex I-C establishing temporary S232 rates for mobile industrial equipment and machinery through December 31, 2027. It also designates aluminum lithographic plates and steel racks as new derivative products subject to S232 duties as an anti-circumvention measure. All temporary modifications revert to Proclamation 11021 rates after December 31, 2027.

On 13 April 2026 the Council of the EU and the European Parliament reached a provisional political agreement, in trilogue with the Commission, on the new EU steel safeguard regulation that will replace the existing WTO-safeguard-based measure (Regulation (EU) 2019/159, last tightened by Implementing Regulation 2025/612) expiring on 30 June 2026. The agreement adopts the core architecture of the Commission's October 2025 proposal (procedure 2025/0726(COD)): an overall duty-free tariff-rate quota of approximately 18.3 million tonnes per year — a roughly 47% reduction versus the 2024 safeguard quotas — covering 30 product categories, with the out-of-quota customs duty raised from 25% to 50%. The deal also introduces a mandatory "country of melt and pour" declaratory requirement on steel imports and obliges the Commission to assess, within two years, whether the country of melt-and-pour should become the basis for country-specific TRQ allocations (closing transhipment loopholes that have allowed Chinese-melted steel to enter via third-country processors). The co-legislators added a reinforced and time-bound review mechanism: a first Commission review of product scope within six months of entry into force, with subsequent biennial scope reviews thereafter. Statutorily, this is a NEW instrument — a regulation adopted under the ordinary legislative procedure, not an implementing act under the WTO Agreement on Safeguards / Regulation (EU) 2015/478 — so it is filed as a new action with a `responds_to` link to the predecessor regime. Formal adoption by Council and EP plenary is expected in May 2026 ahead of the 1 July 2026 application date.

Presidential Proclamation 11021 of 2 April 2026 (signed by President Trump, effective 6 April 2026 at 12:01 a.m. EDT, published 9 April 2026 at 91 FR 18201) consolidates and restructures the Section 232 tariff architecture for aluminum, steel, and copper. The proclamation modifies Proclamations 9704 (aluminum), 9705 (steel), and 10962 (copper) and applies tiered ad valorem duties to the full customs value of imported articles regardless of metal content: 50% on aluminum/steel articles and most copper articles; 25% on certain copper articles and on derivative articles substantially made of the three metals; 10% on derivative articles produced abroad using entirely US-smelted/cast metals; and 0% supplemental duty where existing tariffs already meet a 15% combined-rate floor. UK products receive preferential rates (25% on primary articles and 15% on certain derivatives) contingent on UK smelting/casting under the US–UK trade framework.

South Africa's International Trade Administration Commission (ITAC) recommended, and SARS implemented on 19 March 2026, definitive five-year anti-dumping duties on U, I and H sections of iron or non-alloy steel (structural steel, HS 7216.31, 7216.32, 7216.33 and 7216.40) imported from China (74.98%) and Thailand (20.32%). The investigation, initiated on an application by ArcelorMittal Rails and Structures (AMRAS), found dumped imports — totalling 28,800 tonnes in 2023/24, with China supplying ~65% — were causing material injury to the SACU domestic industry (full findings in ITAC Report 759). The definitive duties layer on top of an existing 10% ordinary customs duty and a 13% SACU-wide steel safeguard duty, bringing the effective total import burden on Chinese structural steel to approximately 98% above the base tariff.

On 23 February 2026 the Korea Trade Commission (KTC) at its 461st plenary meeting adopted a final affirmative anti-dumping determination against hot-rolled carbon and alloy steel (HRC) imports from China and Japan, recommending definitive five-year duties of 28.16–33.10% on Chinese-origin HRC and 31.58–33.57% on Japanese-origin HRC to the Ministry of Economy and Finance (MOEF) for implementation via customs notification. The investigation was initiated in March 2024 on petition by Hyundai Steel, following December 2023 injury allegations, with provisional duties imposed in September 2025. KTC simultaneously recommended acceptance of price-undertaking commitments from three Japanese companies (including JFE Steel and Nippon Steel) and six Chinese companies (including Baosteel), allowing those exporters to avoid the definitive duties by maintaining minimum import-price levels; remaining non-participating exporters face the full duty rates under a five-year WTO ADA Article 11 sunset ending 2031.

The US Department of Commerce issued a countervailing duty (CVD) order on steel concrete reinforcing bar (rebar) from Algeria, effective 6 July 2026, imposing a 72.94% subsidy-offset rate on Tosyali Iron Steel Industry Algeria SPA and, by default, all other Algerian producers — a rate based on facts available with adverse inferences after the Algerian government and/or exporters did not fully cooperate with Commerce's subsidy questionnaires. Because USTR determined Algeria is not a "Subsidies Agreement country," the US ITC was not required to make an injury determination, so the CVD order took effect on Commerce's final subsidy determination alone. This is a separate legal track from the parallel antidumping case on the same product (see responds_to) — the AD investigation used a 127.32% margin, the CVD order uses 72.94%, and both stack as cumulative duties on Algerian rebar. Parallel countervailing-duty investigations on Egypt and Vietnam remained at the preliminary stage as of Commerce's 13 January 2026 determinations, with net subsidy rates set at 29.51% (Egypt) and 1.08% (Vietnam); these are provisional cash-deposit rates pending each country's final CVD determination.

The Ministry of Finance, Department of Revenue (Central Board of Indirect Taxes and Customs) issued Notification No. 02/2025-Customs (SG) dated 30 December 2025, imposing a definitive three-year safeguard duty on imports of "Non-Alloy and Alloy Steel Flat Products" classified under Customs Tariff headings 7208, 7209, 7210, 7211, 7212, 7225 and 7226 (hot-rolled coils/sheets/plates, hot-rolled plate-mill plates, cold-rolled coils/sheets, metallic coated sheets including galvanneal and aluminium-zinc coated, and colour-coated coils/sheets). Duty rates are graduated: 12% ad valorem for 21 April 2025 – 20 April 2026, 11.5% for 21 April 2026 – 20 April 2027, and 11% for 21 April 2027 – 20 April 2028. The notification implements the final findings of the Director General (Trade Remedies) (DGTR notification 22/01/2024-DGTR dated 16 August 2025) which concluded that imports of subject goods rose from 2.293 mt in FY 2021-22 to 6.612 mt during the period of investigation, causing serious injury and threat of serious injury to the domestic industry. The definitive measure supersedes the provisional 200-day safeguard duty imposed at 12% ad valorem from 21 April 2025 by Notification 01/2025-Customs (SG); no safeguard duty applies for the interim period between expiry of the provisional duty (early November 2025) and the day preceding Gazette publication of the definitive notification. Imports from developing-country WTO members are exempt unless the share of any individual developing country exceeds 3% of total imports of the subject goods, or the collective share of developing countries exceeding 3% individually exceeds 9% — the China and Vietnam carve-outs from this exemption preserve full applicability of the duty to the dominant cheap-import sources.

The Türkiye Ministry of Trade's Imports General Directorate published Communiqué No. 2025/44 in Resmî Gazete on 27 December 2025, imposing a definitive flat-rate 3.95% ad valorem anti-dumping duty on imports of cold-rolled stainless flat steel (CRSS) originating in the People's Republic of China, covering 22 customs-tariff positions under HS headings 7219 and 7220. The duty runs for five years from the date of publication (sunset 27 December 2030). The parallel investigation track into Indonesian-origin CRSS was closed without measures — imports from Indonesia were determined to be at a negligible dumping margin and caused no material injury to the domestic industry. The investigation (initiated as Notice 2024/20, June 2024) was petitioned by the Turkish stainless-steel producer consortium (Posco Assan Stainless TST, Sandvik Karbosan, and ÇağdaşÇelik).

The Ministry of Finance, Department of Revenue (Central Board of Indirect Taxes and Customs) issued Notification No. 35/2025-Customs (ADD) dated 18 December 2025, imposing a definitive five-year anti-dumping duty on imports of Cold Rolled Non-Oriented Electrical Steel (CRNO) originating in or exported from the People's Republic of China, falling under tariff headings 7210, 7225 and 7226 of the First Schedule to the Customs Tariff Act 1975. Duty rates are specific: USD 223.82 per metric tonne for Wuhan Iron & Steel Co., Ltd., Baosteel Zhanjiang Iron & Steel Co., Ltd., and Baoshan Iron & Steel Co., Ltd., and USD 414.92 per metric tonne for all other Chinese producers/exporters. The measure implements the DGTR final findings F.No. 06/32/2024-DGTR dated 19 September 2025 (JSW Steel and Tata Steel principal domestic complainants), which found dumping margins and material injury to the Indian domestic industry. Cold-rolled fully hardened silicon electrical steel (CRFH), the upstream feedstock used to produce CRNO, is explicitly excluded from the duty. CRNO is a critical input for electric motors, transformers, generators and EV traction motors — its dumping into India underpinned a complaint from integrated mills (JSW, Tata) competing against Chinese supply at margins below construction-cost-plus-reasonable-profit benchmarks.

On 26 November 2025 Prime Minister Mark Carney announced a package of measures to protect Canada's steel and softwood lumber industries, effective 26 December 2025. For steel, Canada tightened the tariff-rate quota (TRQ) available to countries without a Canada free trade agreement from 50% to 20% of 2024 import levels, and cut the TRQ for FTA partners outside CUSMA (i.e. not the US/Mexico) from 100% to 75% of 2024 levels; imports above quota face a 50% surtax. A new 25% tariff on the full value of listed steel-derivative products (doors, windows, fasteners, structural components and related goods) applies to all countries, covering an estimated CAD 10 billion+ of derivative imports. For softwood lumber, Canada added CAD 500 million to the BDC Softwood Lumber Guarantee Program (bringing it to CAD 1.2 billion) and earmarked a further CAD 500 million under the Large Enterprise Tariff Loan facility for lumber-sector liquidity support.

On 30 July 2025 the Governor in Council amended the Order Imposing a Surtax on the Importation of Certain Steel Goods (SOR/2025-148, effective 27 June 2025), via SOR/2025-155, effective 1 August 2025. The amendment raises the tariff-rate quota (TRQ) available to countries with a Canadian free trade agreement (excluding CUSMA partners US/Mexico) from a lower prior allocation to 100% of 2024 import volumes, while holding the quota for non-FTA-partner countries at 50% of 2024 volumes; imports exceeding either threshold face a 50% surtax. The amendment also expands the list of covered steel product categories from 5 broad groupings to 23 specialized subcategories (ingots, billets, hot- and cold-rolled sheet, rebar, wire rod, structural steel, and multiple pipe types). Ottawa framed the changes as addressing the risk of steel produced in third countries being diverted into the Canadian market as a result of US Section 232 tariffs and non-market foreign production overcapacity.

Saudi Arabia's General Authority of Foreign Trade (GAFT), chaired by Dr. Majed Alkassabi, issued its final affirmative determination on 29 June 2025 imposing definitive anti-dumping duties on longitudinally-welded circular stainless-steel pipes and tubes originating in or exported from the People's Republic of China and Taiwan. Duty rates range from 6.5% to 27.3% depending on exporter, effective 30 June 2025, following an investigation opened 2 May 2024 on a domestic-industry complaint. The measure runs for five years, with the Zakat, Tax and Customs Authority (ZATCA) directed to collect the duty at the border.

The US Department of Commerce initiated antidumping and countervailing duty investigations on steel concrete reinforcing bar (rebar) from Algeria, Bulgaria, Egypt, and Vietnam following a June 2025 petition by the Rebar Trade Action Coalition. On 19 December 2025, Commerce published its preliminary affirmative less-than-fair-value determination for Algeria, setting a 127.32% dumping margin (Tosyali Iron and Steel Industry — Algeria, applied to all other Algerian exporters) and requiring cash deposits at that rate. Parallel LTFV and countervailing-duty investigations on Bulgaria, Egypt, and Vietnam remained pending at the provisional/preliminary stage as of this determination, with Bulgaria and Egypt preliminary determinations later postponed to March 2026 (Egypt/Vietnam preliminary CVD margins of 29.51% and 1.08% respectively were set earlier in the case). The investigation covers rebar in straight-length or coil form (HTS-classified, excluding plain/smooth rounds), imported for use in reinforced-concrete construction. Algeria's period of investigation was April 2024–March 2025.

Commission Implementing Regulation (EU) 2025/612 of 24 March 2025 amends the EU steel safeguard regime first imposed by Regulation (EU) 2019/159, materially tightening the tariff-rate quota (TRQ) system that governs imports across 26 product categories of finished and semi-finished steel. The Commission cuts the annual liberalisation rate (the volume by which TRQs grow each year) from 1% to 0.1%, effectively freezing the in-quota volumes available to third-country exporters at near-current levels through the safeguard's expiry on 30 June 2026. The regulation also repeals the carry-over mechanism that previously allowed unused quarterly TRQ volumes to roll into the next quarter for product categories under significant import pressure, and eliminates the ability of exporting countries to access the residual (other-country) quota in the final quarter of each safeguard year for those categories. The latter change forecloses the route by which Chinese, Indian, Turkish, Korean and Vietnamese mills had increasingly back-filled into unused Russian and Belarusian quota allocations after the 2022 sanctions disruption. Most adjustments enter into force on 1 April 2025; the slower liberalisation pace and the carry-over removal in the most pressured categories take effect 1 July 2025. The measure is the headline trade-policy deliverable of the European Steel and Metals Action Plan unveiled by the Commission on 19 March 2025, and it is explicitly framed as a defensive response to (i) global overcapacity in Chinese steel and (ii) anticipated trade diversion into the EU after the United States reinstated universal 25% Section 232 steel/aluminum tariffs on 12 March 2025. Above-quota imports remain subject to the 25% out-of-quota duty inherited from the 2019 safeguard.

Commission Implementing Regulation (EU) 2025/778 of 14 April 2025, adopted under Regulation (EU) No 654/2014 (the EU enforcement regulation for international trade rights), reinstates the EU's 2018 and 2020 commercial rebalancing measures against the United States and adds new countermeasures in response to the second Trump administration's 10 February 2025 Section 232 proclamations, which restored a universal 25% tariff on steel imports and raised the aluminium tariff to 25% effective 12 March 2025 (filed as 2025-02-11-us-section-232-steel-aluminum-global-tariff-reinstatement). The combined package targets approximately €26 billion of EU imports from the United States — matching the scope of US measures affecting EU exports — and combines the reinstatement of pre-existing duties on a first tranche of products (steel, aluminium, agricultural goods, motorcycles, and other industrial items originally subject to the 2018 and 2020 lists) with new duties on roughly €18 billion of additional US-origin goods spanning poultry, beef, certain seafood, nuts, eggs, dairy, sugar and vegetables on the agricultural side, and steel, aluminium, textiles, leather, appliances, plastics and wood products on the industrial side. Tariff rates layer onto MFN duties at up to 50% for some products, mirroring the structure of the 2018 measures. On the same day the Commission published Implementing Regulation (EU) 2025/786, which suspends application of Articles 2 and 3 of 2025/778 for 90 days, until 14 July 2025, to allow space for bilateral negotiations following the US 9 April 2025 announcement of a 90-day pause on its own reciprocal-tariff regime (2025-04-02-us-trump-reciprocal-tariff-regime). The legal scaffolding therefore exists and is in force, but no duties were collected during the suspension window. This is the first standalone EU rebalancing instrument adopted against the United States in the second Trump administration and the first major use of Reg 654/2014 since the 2018-2020 Section 232 episode.

President Trump signed two Presidential Proclamations on 11 February 2025 reinstating a universal 25% ad-valorem tariff on all steel-mill products and raising the aluminum tariff from 10% to 25% on all imports into the United States, effective 12 March 2025. The proclamations revoked every bilateral exclusion and quota arrangement negotiated by the Biden administration with the EU, UK, Japan, Korea, Australia, and others under the 2021-2022 "alternative measures" frameworks, returning all trading partners to the baseline Section 232 rate without product-level or country-level carve-outs.

The Türkiye Ministry of Trade's Imports General Directorate published Communiqué No. 2024/33 in Resmî Gazete No. 32689 on 11 October 2024, imposing definitive ad valorem anti-dumping duties on hot-rolled flat steel products originating in the People's Republic of China, India, Japan and the Russian Federation. Duties range from 6.10% to 43.31% CIF and run for a five-year initial term from the date of publication, subject to interim or expiry review. The measure covers roughly 90 tariff lines under CN/HS chapters 7208, 7211, 7212, 7225 and 7226 — the principal hot-rolled flat-steel customs codes. China-origin producers face the widest dispersion (residual 43.31% on unsampled producers, named-producer rates 15–36%); Japan applies a flat 9% to all producers; India and Russia residuals sit at 9% with named- producer rates as low as 6.0–6.10%. Imports of "plate rolled in a plate mill" accompanied by a Producer's Certificate under Notice 2002/1 are exempt. The petition was filed by TÇÜD (Türkiye Çelik Üreticileri Derneği — Turkish Steel Producers' Association) on behalf of integrated mills Erdemir, İsdemir, Çolakoğlu, Habaş and Tosçelik, and addresses Chinese HRC diversion to the Türkiye market following US Section 232 steel tariffs and EU CBAM/safeguard tightening.

Governor in Council made the China Surtax Order (2024) (SOR/2024-187) on 20 September 2024 under subsection 53(2) of the Customs Tariff, imposing a 100% surtax on Chinese-origin electric and certain hybrid passenger automobiles, trucks, buses, and delivery vans (HS chapters 87.02–87.04) effective 1 October 2024. An amending order (SOR/2024-202, registered 11 October 2024) extended a 25% surtax to a defined list of Chinese-origin steel and aluminum products (HS chapters 72 and 76) effective 22 October 2024. Canada framed the measures as a response to Chinese state-led overcapacity, non-market subsidies, and weak labour/environment standards, and explicitly aligned them with the US Section 301 hike and the EU's parallel anti-subsidy duties on Chinese EVs.

The EU Carbon Border Adjustment Mechanism (CBAM) entered its definitive phase on 1 January 2026 following a transitional reporting period that began October 2023. Under Regulation (EU) 2023/956, importers of goods in six carbon-intensive sectors (iron and steel, aluminium, cement, fertilizers, electricity, and hydrogen) must now purchase CBAM certificates corresponding to embedded carbon emissions. The Q1 2026 certificate price was set at EUR 75.36 per tonne CO2, calculated from EU ETS auction prices. In 2026, the adjustment factor is 2.5%, rising annually to 100% by 2034.