Industrial Policy & Trade Monitor· 2663 actions· ✨ 89 recent

The European Commission approved, under EU State aid rules, a EUR 1.2 billion Dutch scheme known as NIKI (Nationale Investeringsregeling Klimaatprojecten Industrie) on 20 May 2025. Administered by the Netherlands Enterprise Agency (RVO) on behalf of the Ministry of Economic Affairs, the scheme funds direct grants to industrial enterprises (manufacturing, waste management and remediation activities, SBI code C and E-37/38.2) that cut lifecycle greenhouse-gas emissions, and is the first EU State aid measure to run direct decarbonisation projects and resource-efficiency/circularity projects in the same competitive bidding process. Aid is awarded competitively by lowest euros requested per tonne of CO2-equivalent abated; each project must achieve a minimum lifecycle GHG reduction of 100,000 tonnes and request at least EUR 30 million in aid. The scheme runs through 31 December 2029.

The Netherlands extended its national export-control measure under the Besluit Strategische Goederen to a new equipment class: specific optical and e-beam measuring and inspection systems used in advanced semiconductor production (capable of detecting defects at 21 nm and below). A national licence issued by the Dutch government (CDIU / BUZA / EZ joint approval) is now required for exports to all destinations outside the EU. The measure was announced by Minister Klever in the Government Gazette on 15 January 2025 and took effect 1 April 2025, directly affecting ASML's Hermes Microvision (HMI) subsidiary and ASM International (ASMI).

On 6 September 2024 the Dutch government announced an expansion of its national export-control measure on advanced semiconductor manufacturing equipment, bringing two additional ASML DUV immersion lithography systems — TWINSCAN NXT:1970i and NXT:1980i — under a Dutch national authorisation requirement for shipments to destinations outside the EU. The measure took effect on 7 September 2024 via a ministerial regulation published in Staatscourant 2024 no. 29008. Until this point those two older system variants were controlled extraterritorially through the US Foreign Direct Product Rule; the change transfers licensing authority from BIS to the Dutch government and aligns the Dutch national list more tightly with the perimeter set by the June-2023 measure on NXT:2000i+. ASML characterised the update as a "technical change" with no expected impact on its 2024 financials or longer-term outlook.

The Dutch Council of Ministers on 28 March 2024 approved Project Beethoven, a EUR 2.51 billion public-investment package for the Brainport-Eindhoven semiconductor ecosystem. The package combines EUR 1.28 billion from the Nationaal Groeifonds, EUR 450 million in additional central- government education/talent spending, and EUR 780 million in regional co-funding from the Province of Noord-Brabant and the Municipality of Eindhoven. Investment pillars cover infrastructure (mobility, road capacity on A2/A58/A67, energy-grid reinforcement), a national semiconductor-talent plan targeting 2,000 master's-programme graduates per year by 2030, 16,000+ new housing units in the Brainport region, and quality-of-life improvements. The Government stated it expects these measures to lead ASML to continue to invest and maintain its statutory and tax domicile in the Netherlands.

The Dutch government announced on 30 June 2023 a new national export-licensing requirement covering specific advanced semiconductor manufacturing equipment, most prominently ASML's TWINSCAN NXT:2000i and subsequent DUV immersion lithography systems used at ≤14/16nm logic, advanced DRAM, and advanced 3D NAND production. Effective from 1 September 2023 via the national Strategic Goods Decree, the rule completes the trilateral US-Japan-Netherlands chip-equipment perimeter initiated by the January 2023 trilateral agreement. Although nominally country-neutral, the BIS Foreign Direct Product Rule means licences for shipments to "countries of concern" — read: China — face a presumption of denial. Subsequent guidance in 2024 expanded coverage to additional TWINSCAN NXT:1970Ci and 1980Di system variants.

The Wet veiligheidstoets investeringen, fusies en overnames ("Vifo Act") is the Netherlands' cross-sector statutory FDI screening regime. Adopted by the States-General on 18 May 2022 (Stb. 2022, 215) and entered into force on 1 June 2023 together with two implementing decrees (Stb. 2023, 173 — main implementing decree; Stb. 2023, 172 — decree defining the scope of "sensitive technology"), the Act establishes mandatory pre-closing notification and a security review by the Bureau Toetsing Investeringen (BTI, part of the Ministry of Economic Affairs and Climate) for transactions affecting (i) "vital providers" in critical infrastructure sectors — energy, transport, telecoms, port operators, banking infrastructure — and (ii) Dutch undertakings active in "sensitive technology", defined to include EU Reg 2021/821 Annex I dual-use items, military goods, and additional national-security technologies. The regime applies retrospectively to transactions completed after 8 September 2020. It is the foundational instrument under which the Dutch national export-control measures on ASML DUV immersion lithography (filed: 2023-06-30 and 2024-09-07) operate, and the Dutch peer of US CFIUS, EU Regulation 2019/452, the German AWG §§55-62, the French Décret 2014-479 / R. 151-1 et seq., and the UK NSI Act 2021.