Industrial Policy & Trade Monitor· 2662 actions· ✨ 89 recent

The Union Cabinet chaired by Prime Minister Narendra Modi approved on 5 May 2026 two new semiconductor manufacturing units under the India Semiconductor Mission (ISM) Phase 1: Crystal Matrix Limited (CML) — India's first GaN-based compound-semiconductor and Mini/Micro-LED display fabrication facility (INR 3,068 crore, Dholera, Gujarat) and Suchi Semicon Private Limited (SSPL) — an OSAT facility for discrete semiconductors (INR 868 crore, Surat, Gujarat). Cumulative investment INR 3,936 crore (~USD 400mn); 2,230 skilled jobs at full ramp. This constitutes the 12th and final batch of ISM Phase 1 approvals, closing the first-phase envelope before ISM 2.0 (filed 2026-02-01) takes over.

On 9 April 2026 the Government of India, exercising powers under section 4(1) of the Special Economic Zones Act 2005, gazetted a 66.166-hectare sector-specific Special Economic Zone at Dholera Special Investment Region, Gujarat for Tata Semiconductor Manufacturing Pvt. Ltd, exclusively for electronic hardware, software and IT/ITES. The notification is the statutory site- enabling instrument for India's first commercial-scale wafer-fab plant — a ~INR 91,000 crore (~USD 11bn) Tata Electronics / PSMC (Powerchip, Taiwan) joint project announced under India Semiconductor Mission (ISM) 1.0 in February 2024 — and follows the Letter of Approval issued on 17 March 2026. The same notification designates the SEZ as an Inland Container Depot under the Customs Act 1962 with effect from 9 April 2026, enabling on-site customs clearance for fab inputs.

The Directorate General of Trade Remedies (DGTR) initiated an anti-dumping investigation on 20 March 2026 into imports of Polytetrafluoroethylene (PTFE) originating in or exported from China PR and Russia (Initiation Notification No. 6/9/2026-DGTR), exercising powers under Rule 5 of the Anti-Dumping Rules 1995 and Sections 9A–9C of the Customs Tariff Act 1975. The investigation covers PTFE in all commercial forms — granular moulding powder, fine powder, and aqueous dispersion — under HS 3904.61, with the period of investigation (POI) set as April 2024 to September 2025 (18 months) and the injury investigation period spanning 2021-22 through the POI. The investigation was filed by Gujarat Fluorochemicals Limited (GFL) and other Indian domestic fluoropolymer producers alleging material injury from dumped imports; Russia's scope is unusual for India DGTR and constitutes the first formal trade-remedy reading of Russia's PTFE export pricing.

India's Department for Promotion of Industry and Internal Trade (DPIIT) issued Press Note 2 of 2026 on March 15, 2026 (following Cabinet approval on March 10, 2026), recalibrating the Press Note 3 (2020) FDI framework for investments from countries sharing a land border with India. Global investors with up to 10% non-controlling Chinese (or other land-border) shareholding can now invest in India under the automatic route across sectors, while entities domiciled in China, Hong Kong, Pakistan, Nepal, Bhutan, Bangladesh, Myanmar and Afghanistan continue to require prior government approval. For 40 designated strategic sub-sectors — including rare earth permanent magnets, polysilicon and ingot-wafer manufacturing, printed circuit boards, electronic capital goods, Li-ion batteries and machine tools — proposals will be decided within a binding 60-day window, with majority Indian ownership and control mandated at all times. Effective from the date of the corresponding amendment to the FEMA Non-Debt Instruments Rules.

Gujarat Chief Minister Bhupendra Patel launched the Gujarat Science, Technology and Innovation (STI) Policy 2026–2031 on 1 March 2026 at the SemiConnect 2026 Conference in Gandhinagar, establishing a five-year ₹1,000 crore Swadeshi Anusandhan Fund (Indigenous Innovation Fund) for domestic R&D across strategic sectors including AI, semiconductors, quantum technologies, biotechnology, green energy, and defence. The policy targets state STI expenditure of 1% of GSDP by 2030, creation of 1 lakh skilled research professionals, 1,000+ IP filings annually, and builds three Gujarat Rajya Research and Innovation Cluster (GRRIC) corridors to anchor the state's growing semiconductor manufacturing ecosystem.

On 1 February 2026 Finance Minister Nirmala Sitharaman tabled India's Union Budget 2026-27, with Customs Notification No. 02/2026-Customs (dated 1 Feb 2026, effective 2 Feb 2026) implementing the customs-duty package. The notification zero-rates basic customs duty (BCD) on (i) capital goods imported for domestic processing of critical minerals — crushing, beneficiation, refining, chemical-processing, separation/purification, and metallurgical/alloy-making equipment; (ii) capital goods for lithium-ion cell manufacturing for battery energy storage systems (BESS), extending the 2024-25 EV-cell exemption to stationary storage; and (iii) twelve additional critical minerals plus cobalt powder and lithium-ion battery scrap, on top of the 25 critical minerals already exempted in the FY2024-25 budget. In parallel, critical minerals (including monazite / rare-earth concentrate) are migrated from the customs-exemption notification mechanism into the First Schedule of the Customs Tariff Act at Nil BCD, effective 1 May 2026 — a tariffisation step that locks the rate into primary legislation rather than annually renewable notification. The Budget also commits to dedicated critical-mineral / rare-earth-magnet processing corridors in Andhra Pradesh, Odisha, Kerala and Tamil Nadu. Structurally this is the fiscal/tariff layer underneath the National Critical Mineral Mission (NCMM, Jan 2025) and the National Manufacturing Mission (Feb 2025): NCMM funds capex and overseas asset acquisition (₹34,300 cr), this Budget removes the import-duty drag on the equipment needed to actually run domestic processing lines. It complements the REPM scheme (Nov 2025) for sintered rare-earth magnets and Semicon Mission 2.0 (Feb 2026) on the demand side for refined critical minerals.

On 1 February 2026 Finance Minister Nirmala Sitharaman, presenting the Union Budget 2026-27, announced the launch of India Semiconductor Mission (ISM) 2.0 — the second-phase national semiconductor industrial-policy framework succeeding ISM 1.0 (2021, INR 76,000 crore). The Budget makes an initial INR 1,000 crore provision for ISM 2.0 in FY 2026-27 and raises the Electronics Components Manufacturing Scheme (ECMS) outlay from INR 22,919 crore to INR 40,000 crore. ISM 2.0's distinct architecture centres on four strategic priorities not in ISM 1.0: (i) indigenous semiconductor equipment, chemicals, gases and materials production, (ii) full-stack Indian semiconductor IP design, (iii) industry-led R&D and skills/training centres, and (iv) domestic and global supply-chain integration. Total mission outlay reported as approximately INR 1-1.2 lakh crore (~USD 12-14bn) is being finalised; Cabinet clearance and the formal scheme launch are expected by mid-2026.

The Rajasthan State Cabinet, chaired by Chief Minister Bhajan Lal Sharma, approved the Rajasthan Aerospace & Defence Policy 2026 on 21 January 2026 in the same session that cleared the Rajasthan Semiconductor Policy 2026. The policy positions Rajasthan as a manufacturing and MRO hub for aircraft, helicopters, drones, missiles, avionics, satellite buses, armoured vehicles, radars, defence electronics, and precision engineering, targeting OEMs, system integrators, MSMEs, and startups under the Make in India / Atmanirbhar Bharat defence-industrial pivot. Projects are tiered (large / mega / ultra-mega) with differentiated incentive menus including capital grants, tax reimbursements, and turnover-linked incentives aligned with national DPEPP and iDEX frameworks.

The Government of Rajasthan approved its first dedicated semiconductor industrial policy on 21 January 2026, offering a layered incentive stack on top of India's national Semiconductor Mission (ISM). The policy covers fab, ATMP, OSAT, compound semiconductors (SiC, GaN), display fabs, sensors, power electronics, PCBs, and fabless design, with investment-classification tiering (large / mega / ultra-mega categories). Key incentives include a 60% top-up on any ISM capital subsidy received, a 5% interest subsidy on term loans, 100% electricity duty exemption for seven years, 75% stamp duty and land conversion charges exemption, and SGST reimbursements. The official policy document was publicly released on 24 March 2026 via the Rising Rajasthan portal.

India's Ministry of Mines on 19 January 2026 notified the country's first national Tailings Policy, establishing a standardised framework for the systematic exploration, sampling and economic evaluation of critical and strategic minerals from secondary sources — tailings, mine dumps, slag, anode slimes, red mud and fly ash — at existing mines. The policy designates the Geological Survey of India (GSI), Indian Bureau of Mines (IBM) and Atomic Minerals Directorate (AMD) as the implementing agencies, and mandates inter-ministry coordination across the Ministries of Coal, Mines, Petroleum and Atomic Energy because critical-mineral host materials cut across sectoral jurisdictions. It supplements the National Critical Mineral Mission (2025-01-29) by adding a secondary-source recovery track aimed at lithium, cobalt, nickel and rare earth elements found as companion minerals in legacy mining waste, with the explicit objective of reducing import dependency.

The Government of Maharashtra, Industries Department, notified the Maharashtra Industry, Investment, and Services Policy-2025 on 31 December 2025, valid for five years and superseding the prior Maharashtra Industrial Policy 2019. The umbrella state-level instrument supports Maharashtra's "trillion-dollar economy by 2030" and "Developed Maharashtra 2047" vision with targets of ₹70.5 lakh crore (~USD 850 bn) cumulative investment, 50 lakh (5 million) jobs across manufacturing and services, and expansion of industry's share of Gross State Value Added to 30%. It is Maharashtra's first-ever combined industry + services + investment-promotion framework (prior policies were industry-only), establishes the unified "Invest Maharashtra" platform and revamped MAITRI 2.0 portal (125+ services, AI investor support, blockchain document verification), and empowers a Cabinet Sub-Committee under the Chief Minister to sanction bespoke customised-package incentives for Mega and Ultra-Mega Projects above the ₹500 crore threshold.

India's Directorate General of Foreign Trade (DGFT) issued Notification No. 31/2025-26 on 23 September 2025, revising Appendix-3 of Schedule-II of the ITC(HS) Export Policy to add a new Category 7 — "Certain Emerging Technologies and related items" — to the SCOMET (Special Chemicals, Organisms, Materials, Equipment and Technologies) list. Category 7 brings under export-licence control: quantum-computing systems (≥34 qubits with controlled error rates), cryogenic CMOS integrated circuits, advanced lithography tools (≤45 nm minimum resolvable feature), additive-manufacturing equipment under vacuum, and related software/technology. The notification took effect 30 days from issuance, on 23 October 2025, and is the first new SCOMET category created since the list's last major restructure, aligning India's strategic-trade-control regime with parallel US BIS, Wassenaar Arrangement, and EU dual-use list updates.

The Yogi Adityanath cabinet approved the Uttar Pradesh Electronics Component Manufacturing Policy 2025 (UP ECMP-2025) on 3 September 2025, designating an effective date retroactive to 1 April 2025 for a six-year policy horizon (sunset 31 March 2031). Administered by UPLC and Invest UP, the policy targets INR 5,000 crore in new investment by layering state-level incentives on top of the central MeitY Electronics Component Manufacturing Scheme (ECMS), covering eleven priority component categories including displays, camera modules, multilayer PCBs, magnetics, lithium-ion cells, capacitors, resistors, semiconductor packaging substrates, sensors, connectors, and oscillators. UP is the fourth major Indian state (after Gujarat, Tamil Nadu, and Andhra Pradesh) to publish a dedicated ECMS-stacking instrument, completing the Big-Four-state cluster for ECMS-anchored greenfield investment.

The Union Cabinet chaired by Prime Minister Narendra Modi approved on 12 August 2025 four new semiconductor manufacturing units under the India Semiconductor Mission (ISM) Phase 1: SiCSem Private Limited (Silicon Carbide compound-semiconductor fab, Odisha, with UK partner Clas-SiC Wafer Fab Ltd.), 3D Glass Solutions Inc. (advanced glass-substrate packaging, Odisha), Continental Device India Private Limited / CDIL (discrete power-semiconductor expansion, Punjab), and Advanced System in Package Technologies / ASIP (OSAT unit with South Korea's APACT Co. Ltd, Andhra Pradesh). Cumulative investment INR 4,600 crore (~USD 525mn); 2,034 skilled jobs at full ramp. This brought total approved ISM Phase 1 projects to 10 across 6 states, with cumulative committed investment of approximately INR 1.60 lakh crore (~USD 18bn).

The Union Cabinet, chaired by Prime Minister Narendra Modi, approved the establishment of a sixth semiconductor unit under the India Semiconductor Mission (ISM) on 14 May 2025. The unit is a joint venture between HCL and Foxconn (Hon Hai) and will build an Outsourced Semiconductor Assembly and Test (OSAT) plant near Jewar airport in the Yamuna Expressway Industrial Development Authority (YEIDA) area of Uttar Pradesh, manufacturing display driver chips for mobile phones, laptops, automobiles, PCs and other display-equipped devices. The approved investment is INR 3,700 crore (~USD 435 million), with designed capacity of 20,000 wafers per month and output of 36 million units per month.

The Union Cabinet approved the Electronics Components Manufacturing Scheme (ECMS) on 28 March 2025, notified by the Ministry of Electronics and Information Technology (MeitY) via Gazette Notification CG-DL-E-08042025-262341 on 8 April 2025. The scheme has an original outlay of Rs 22,919 crore (~USD 2.7bn) over six years (FY26-FY31, with an optional one-year gestation period), raised to Rs 40,000 crore in the Union Budget 2026-27. ECMS targets passive components, multi-layer PCBs, lithium-ion battery cells, camera modules, display assembly, electromechanicals, bare-component sub-assemblies and capital equipment for semiconductor and electronics manufacturing -- the ecosystem feeding the existing large-scale-electronics PLI and the India Semiconductor Mission. The scheme targets investment of Rs 59,350 crore, production of Rs 4,56,500 crore and 91,600 direct jobs.

The Government of Karnataka, Department of Industries and Commerce, notified the Karnataka Industrial Policy 2025-30 in the Karnataka Gazette on 11 February 2025, with the policy taking legal effect from 8 February 2025 and valid for five years (or until superseded). It supersedes the prior Karnataka Industrial Policy 2020-25. The umbrella state-level framework targets ₹7.5 lakh crore (~USD 90 bn) in fresh investment and 20 lakh (2 million) new jobs by 2030, positioning Karnataka as a top-Asia destination for high-technology manufacturing — semiconductors, EVs, aerospace, defence, biotech, medical devices, textiles and renewable energy. It introduces zone-based incentive categorisation (Zone 1/2/3 district classification), capital subsidies, stamp-duty exemption, electricity-tax exemption, interest subsidy, ESDM-specific top-up incentives that layer onto central PLI/ECMS/Semicon Mission schemes, and a Cabinet Sub-Committee under the Chief Minister to sanction bespoke "Anchor Investor" and "Mega/Ultra-Mega" customised incentive packages.

On 1 February 2025, Finance Minister Nirmala Sitharaman announced the National Manufacturing Mission (NMM) in the Union Budget 2025-26 as a horizontal umbrella framework extending the 2014 "Make in India" architecture across small, medium and large industries. The mission rests on five focal areas: (i) ease and cost of doing business; (ii) a future-ready workforce for in-demand jobs; (iii) a vibrant and dynamic MSME sector; (iv) availability of technology; and (v) quality manufacturing. It will deliver policy support, execution roadmaps, and a governance/monitoring framework binding central ministries with states. NMM specifically commits to building a clean-tech manufacturing ecosystem with explicit coverage of solar PV cells, EV batteries, motors and controllers, electrolysers, wind turbines, very-high-voltage transmission equipment, and grid-scale batteries — i.e., the full hardware stack for India's Panchamrit (500 GW non-fossil by 2030), FAME-III EV ramp, and National Green Hydrogen Mission. NMM is the first horizontal Indian manufacturing-mission instrument in the IPTM register; existing IND entries are sector-specific PLIs (electronics, batteries, steel, semiconductors) and the National Critical Mineral Mission. Operational rollout flows through subsequent Cabinet-level scheme approvals (e.g. Biopharma SHAKTI ₹10,000 cr, Chemical Parks ₹600 cr in BE 2026-27); the mission itself does not carry a single headline outlay because it is the framework rather than an instrument.

On 29 January 2025 the Union Cabinet of India approved the National Critical Mineral Mission (NCMM), a seven-year programme running FY2024-25 through FY2030-31 with a headline financial envelope of ₹34,300 crore (≈USD 4.0 bn). The structure is split: ₹16,300 crore of direct government outlay administered by the Ministry of Mines, plus an expected ₹18,000 crore of investment by central public-sector undertakings (PSUs) and other stakeholders. The mission was first announced by the Finance Minister in the Union Budget 2024-25 (23 July 2024) and the Cabinet approval gave it formal sanction. The NCMM covers the full critical-minerals value chain: domestic exploration, mining, beneficiation, processing, recycling from end-of-life products, and acquisition of overseas mineral assets. The Geological Survey of India (GSI) is tasked with executing 1,200 exploration projects over the seven-year window (vs. 368 projects over the prior three years), expanded to offshore polymetallic-nodule provinces containing cobalt, REE, nickel and manganese. More than 100 critical-mineral blocks are slated for auction. Khanij Bidesh India Ltd (KABIL) — the JV of NALCO, HCL and MECL — is the designated vehicle for overseas acquisitions, with active Argentina lithium (CAMYEN SE, 15,703 ha) and Australia lithium/cobalt off-take pipelines. India's official critical-minerals list contains 30 commodities, of which 24 are inscribed in Part D of Schedule I of the MMDR Act 1957 (after the 2023 amendment), reserving central-government auction authority over them. The NCMM sets an explicit recycling target of 15-20% of domestic critical-mineral demand met from secondary sources (e-waste, battery scrap, industrial waste) by 2035. The mission also funds a National Centre of Excellence for Critical Minerals and offers customs-duty waivers on 25 critical minerals (announced in the same FY24-25 budget) to lower import costs while domestic capacity scales. NCMM is India's pull-side complement to the US IRA, EU Critical Raw Materials Act, Canada Critical Minerals Strategy and Australia Critical Minerals Strategy — a coordinated allied response to Chinese dominance over refined cobalt, REE, graphite and gallium/germanium. For India specifically it is framed as the supply-chain underpinning for FAME-III (EV adoption), the Semicon India programme (gallium/germanium/silicon), and the National Solar Mission (silicon, indium, tellurium, gallium for thin-film PV).

Uttar Pradesh notified its first dedicated state-level Semiconductor Policy on 12 February 2024 (cabinet-cleared 30 January 2024), making it the fourth Indian state with a sectoral semiconductor incentive regime after Tamil Nadu, Karnataka and Gujarat. The policy stacks a 50% additional state capital subsidy on top of the central India Semiconductor Mission (ISM) 50% subsidy — yielding an effective ~75% capex coverage for qualifying fab, display-fab, compound-semiconductor, ATMP/OSAT, and sensor units approved by ISM. It adds a 75% land rebate on the first 200 acres for ATMP/OSAT (30% on additional land), a 5% interest subsidy (capped at ₹1 cr/year for 7 years) on investments up to ₹200 cr, 100% stamp-duty and registration-fee exemption, and a 10-year electricity-duty exemption. Within months of notification the state attracted ₹40,038 cr in investment proposals (Tarq Semiconductor, Kaynes Semicon, Aditech, Vamasundari) with ~32,000 projected jobs, prompting the cabinet to later approve mega-project incentives for investments ≥ ₹3,000 cr.

The Government of Tamil Nadu released the Tamil Nadu Semiconductor and Advanced Electronics Policy 2024 at the Tamil Nadu Global Investors Meet on 7 January 2024. The policy provides a state top-up equal to 50% of the central India Semiconductor Mission (ISM) incentive for any unit approved under the central semiconductor-fab / display-fab / compound-semiconductor / ATMP / sensor / silicon photonics / discrete semiconductor schemes, plus standalone state incentives (capital subsidy, training subsidy, product testing & prototyping support, land cost concessions, stamp duty refund, electricity tax exemption, quality certification, IP, and interest subsidy). Minimum investment threshold is ₹200 crore with a minimum of 150 jobs for the initial ₹200 crore tranche; the policy is valid for three years from the date of notification and is implemented by Guidance Tamil Nadu, the state's investment-promotion agency.

The Union Cabinet approved the Semicon India Programme on 15 December 2021, establishing the India Semiconductor Mission (ISM) as the nodal agency. The programme offers fiscal support of up to 50% of project cost for silicon semiconductor fabs, compound semiconductor facilities, display fabs, ATMP/OSAT units, and chip design. Total outlay: Rs 76,000 crore (approximately $10.2bn at 2021 exchange rates). By February 2024, the Cabinet had approved three major semiconductor units under ISM: Tata Electronics with PSMC (semiconductor fab, Dholera, Rs 91,526 crore), Tata Electronics OSAT (Morigaon, Assam, Rs 27,120 crore), and CG Power OSAT (Rs 7,584 crore), totalling over Rs 1.26 lakh crore in committed investment from private applicants.